DIGITAL BACTERIOLOGICAL INCUBATOR
Techno digitally controlled model bacteriological lab incubator is a double walled chamber with interior made of SS 306 grade sheets & exterior made of cold rolled mild steel sheets finished in epoxy powder coating. Inter space in between walls is tightly packed with glass wool to minimize radiation heat loss. The inner chamber accommodates SS perforated trays at adjustable height. A double walled insulated door mounted on heavy duty hinges & provided with locking arrangements.
Temperature is controlled by a digital temperature controller working in conjunction with PT100 sensor housed in the hot zone.
Air circulating fan assembly driven by suitable motor is incorporated in the unit of maintaining uniform temperature inside the working chamber. Adjustable air ventilator is provided at the top.
Built in front control panel accommodating pilot indicating lamps, ON/OFF switch, digital controller are located at the lower portion or at the right side of the chamber.
Temperature range: Ambient +5°C ~ 80°C -2°C
Temperature accuracy: ± 2°C
Power supply: 230V – Single phase – AC
OPTIONAL:
Microprocessor based digital PID controller with SSR output better ± 1°C accuracy
Digital timer
| Inner chamber (LxBxH) mm | Capacity | Power rating (W) |
| 300 x 300 x 300 | 2.0 | 150 |
| 350 x 350 x 350 | 2.0 | 150 |
| 450 x 450 x 450 | 2.0 | 200 |
| 450 x 450 x 600 | 2.0 | 200 |
| 600 x 600 x 600 | 3.0 | 400 |
| 600 x 600 x 900 | 3.0 | 400 |
TLPPL 105 – “RS” THERMOSTATIC BACTERIOLOGICAL INCUBATOR
RS Thermostatically controlled model will be the same as above except that the temperature is a controlled by capillary thermostat in the hot zone. Adjustable air ventilator is provided at the top.
Built in front control panel accommodating pilot indicating lamps, thermostat and energy regulator located at the lower portion or at the right side of the chamber.
Temperature Accuracy: ± 8 to 10°C